tempora F600 60.06L

Edgebander


img

Productivity, flexibility and user comfort

Time, the most important resource in a modern workshop was the main focus whilst developing the tempora machine concept. Processing edges needs to be as quick, easy and efficient as possible. To achieve this, the tempora models combine the core skills of speed, productivity, flexibility and ease of use in a convincing complete package. The final finishing results when processing both coiled and strip material convince with incredibly high standards, that fulfil the ever increasing demands of edgebanding complete processing.

Modern and optimised edge processing aggregates and a flexible machine body guarantees absolute stability and reliability even at the highest of processing speeds. The user friendly control options, "x-motion plus" and "m-motion" ensure absolute repeatability and individual configurable operating programs enable quick manual change of the aggregates as well as control via the smartouch control panel. 

The tempora 60.06L has a single or dual motor corner rounding unit with a workpiece height of up to 60 mm.

The patented "advantEdge aggregate" brings "invisible joints" to your workshop. You can equip your tempora with a single or dual motor corner rounding unit and there are three free spaces for your choice of finishing units. The smartouch intuitive control unit with a 10 "or 16" touch screen ensures maximum operating convenience and productivity.

... FORMAT-4 Premium machines for premium requirements

  • Constantly high performance in industrial continuous operation
  • Customer specific optimised production solutions
  • Solid design with premium components
  • Many variations of specification packages with high-tech solutions
  • Complete engineering precision
  • Premium user comfort
  • Award winning design
  • Quality and precision from Austria
  • Uncompromised productivity
  • Perfect service package before, during and after the purchase
  • Tailor made financing solutions

Details

Edge feed

Edge feed



Depending on the application, coiled and strip material from 0.4 up to 6 mm can be glued to panel materials up to 60 mm in thickness. An infrared sensor recognises whether edge material is available and the magazine for the automatic feeding of strip material using the needle roller has a capacity of 120 mm.

smartouch control unit with m-motion

smartouch control unit with m-motion



The new smartouch control unit with 10.4' touch-screen and m-motion control enables a quick and easy selection and control of the aggregate as well as the complete monitoring of all machine functions.

  • Storage and loading of user-defined working programs
  • Selection of the motor-position controlled aggregates
  • Fine-adjustment of the aggregates in the range of 1/100th of a millimetre
  • Intuitive adjustable and self-explanatory display of the aggregates
  • Setting of the glue parameters (EVA or PUR)
  • Order specific selection of the aggregates
  • Fine-adjustment of the distance parameters
  • Maintenance plan, clear text error messages, odometer for total metres of material used

  • smartouch control unit with x-motion PLUS

    smartouch control unit with x-motion PLUS



    smartouch control unit and network connection reduces the manual settings to a minimum and enables a quick, easy and intuitive selection and control of the aggregate as well as the complete monitoring of all machine functions from the screen. The functions of smartouch include amongst other things:

    • Unlimited memory for user-defined edge programs
    • Maintenance plan, odometer for total metres of material used
    • Simple, self-explanatory representation of the units and their functions
    • Aggregate selection, exact fine adjustment of the motor positionable aggregates (accuracy of up to 1/100 mm) all from the main control panel
    • Glue temperature setting and automatic temperature reduction of the glue whilst in standby mode Now available with a monitor size of 10.4' and 15'

    Premilling unit
    Ensures a perfect “finish”

    Premilling unit
    Ensures a perfect “finish”



    Two counter rotating, activation controlled and individually adjustable premilling units with diamond coated spiral cutters ensure first class edge processing before the material is glued to the edge. With the premilling unit you will achieve tear free edges when processing laminated material. After entering the exact dimensions, the premilling unit executes a perfect edge cut on your panels. The depth of cut can be electronically positioned on all of the e-motion models as standard.

    Gluepot – short warm-up time, quick operational readiness

    Gluepot – short warm-up time, quick operational readiness



    The Teflon coated gluepot for PUR or EVA glue has a 1.5 kg capacity and as such around 375 metres of edge material can be applied to a 19 mm panel. The short warm-up time of only 10 minutes guarantees quick operational readiness. As an option, the scraper cleaning unit can be integrated into system which speeds up and facilitates the cleaning when changing between glue types.

    Format-4 advantEdge for an optical zero-joint

    Format-4 advantEdge for an optical zero-joint



    The patented advantEdge aggregate from Format-4 enables the optical zero joint when processing co-extruded edge and laser edge material. The aggregate is controlled by the workpiece and can be activated and deactivated directly from the control unit. advantEdge offers the homogenised optic finish of the workpiece with the panel and edge material, in particular with high gloss material. An edge material suited exactly to the material ensures a zero-joint line and as no time-consuming glue change of various colours is required, you profit from considerably reduced changeover times.

    Pressure zone – Practically invisible glue-joint

    Pressure zone – Practically invisible glue-joint



    Solid in its design, the first operation controlled motor driven roller presses the edge material on to the workpiece. The application control ensures that there can be no smearing of glue or movement of the edge material whilst processing. The two conical pressure rollers close the glue joint above and below. From the control panel, two pneumatic pressure settings can be selected: Solid strips with less pressure, coiled material with more pressure.

    End trimming unit
    Precise cuts for every application

    End trimming unit
    Precise cuts for every application



    The end trimming unit consists of two inde­pendent saw units with high-frequency motors (12,000 rpm). Linear guides ensure maximum precision. The end trimming unit tilts from 0° to 10°. Depending on the machine specification, tilting is regulated manually or pneumatically via the control panel (e.g. 10° bevel cut, front only, rear only or front and rear).

    Multi-functional trimming unit
    Innovative precision with quick setup

    Multi-functional trimming unit
    Innovative precision with quick setup



    The multi-functional flush, radius and thin-edge bevel trimming unit consists of two independent trimming units with high frequency motors (12,000 rpm). Linear guides guarantee the highest possible precision with little maintenance required. The easy adjustment and setup of the unit means that it is extremely quick to change between different edge thicknesses and profiles. Depending on the equipment option chosen, the multifunctional trimming unit can either be adjusted manually or pneumatically, controlled via the control panel.

    Corner rounding unit
    An indispensable option

    Corner rounding unit
    An indispensable option



    No more time consuming postprocessing of the workpiece! The Format-4 corner rounding unit provides the perfect 'finish' of workpiece corners (for both softforming and postforming materials) for edge materials from 0.4 mm to 3.0 mm and a processing height of 60 mm and a feed speed from 10 m/min. The solid cast iron construction, linear guides and a high-quality spindle with a starting clutch ensure long-term precision. The corner rounding unit is controlled from the control panel, naturally with the option of choosing which corners need to be rounded (only on the front of the workpiece, only on the back, or both on the front and on the back).

    Two motor double corner rounding unit

    Two motor double corner rounding unit



    Especially for post and softforming the tempora 60.06L with double motor corner rounding unit enables a new dimension in edgebanding. Workpieces with different profiles can be completed in just a single processing step, the need for time consuming subsequent processing is rendered redundant by the perfect finish.

    Radius scraping unit

    Radius scraping unit



    The radius surface receives a light scraping, removing any remnants from the trimming process and ensuring a smooth “finish”. The fine adjustment is manual. The radius scraper unit can be disengaged either manually or pneumatically from the control panel, depending on the model. On all of the e-motion models, the fine adjustment is carried out on the colour touch screen.

    Buffing unit

    Buffing unit



    The unit is made up of two independent electric motors, which are equipped with cotton brushes. The task of the buffing unit is to clean and polish the top and bottom part of the edge. The buffing unit gives a super finish for ABS and PVC edging material. The machine can, on request, be equipped with spraying equipment to apply polish onto the workpiece.

    Electronically controlled glue scraping unit

    Electronically controlled glue scraping unit



    For a perfect surface finish. The light scraping function of the surface scraper knives removes all glue residues from the glue bond on the work­piece surface. One more step towards the perfect and completely finished workpiece.

    Spraying equipment for the perfect “finish”, leaving a workpiece requiring no further processing

    Spraying equipment for the perfect “finish”, leaving a workpiece requiring no further processing



    Low consumption guaranteed due to application controlled spray nozzles to apply separation solution for PUR glue, antistatic solution and lubricant for sensitive edging materials and cleaning agents and polish for clean workpieces and a perfect “finish”.

    Infrared lamp
    for an improved edge adhesion when processing cold workpieces

    Infrared lamp
    for an improved edge adhesion when processing cold workpieces



    The operation controlled, high quality quartz infrared lamp warms the edge surface in front of the glue unit. This guarantees that the edging adheres to cold workpieces.

    “Nesting” Package

    “Nesting” Package



    The “Nesting” Package optimises the processing of workpieces with hinge borings or surfaces with acute angles.

    Pressure beam

    Pressure beam



    On both of the models (”m-motion“ and ”x-motion PLUS“), the pressure beam is positioned using a handle. The position of the pressure beam can be read precisely using the digital counter. 

    Infeed fence

    Infeed fence



    Variable setting of the depth of cut of the premilling unit. With both equipment options, the settings are carried out manually using an indicator clock. The variable depth of cut can be adjusted and set between 0–2 mm. 

    puReady: nitrogen box for glue pots with PUR adhesive

    puReady: nitrogen box for glue pots with PUR adhesive



    The puReady nitrogen box makes you flexible in the use of PUR adhesives. In the future you can stay relaxed during production breaks, colour or glue changes. With puReady, your PUR adhesive, stored in nitrogen, remains fresh and processable for a long time. This keeps you flexible in edgebanding and also facilitates the cleaning of the glue pots.

    • Delays reaction processes in the PUR adhesive and thus prolongs the processing time
    • Facilitates and speeds up the cleaning process
    • Increases flexibility when using different PUR colours and PUR adhesives
    • Provides space for the storage of two glue pots
    • Simple operation and clear control displays
    • Mobile and space saving without power- and compressed air connection
    • Compatible with all glue pots of the tempora edge banders F600 / F800

    Save twice the space.

    Save twice the space.



    The Format-4 storEdge offers space saving storage of your edge material, replaces the edgebander support plate and can be placed next to the machine as and when required.

    Format-4 storEdge

    Format-4 storEdge



    The practical edge storage system 'storEdge' can be additionally equipped with a support plate.

    Format-4 storEdge including support

    Format-4 storEdge including support



    Your most important edge material, always at hand and stored with ease. With the optional support plate your edgebander can always be loaded with edge band material.

    Video

    Free catalogue

    Here you can click through the online catalogue, download a PDF copy or request your own copy free of charge.